Traditional gravity separation of oil and water is ineffective as modern fully synthetic oils in particular, which are increasingly used in compressors, tend to emulsify in condensate.
To assess the condition of the filter, the new oil-water separators from BOGE have two indicator displays - one per tower. The display in the first tower indicates when the filter element is saturated.
Downtime is always unproductive so it is good if this can be limited. The BOGE CC-2 works with ergonomically designed filter elements, these weigh less than traditional elements and fall within ergonomic laws and regulations.
An electronic alarm contact is also available as an option from type CC 175- 2 onwards. This alarms automatically when the filter is saturated. This alarm contact can easily be integrated into a higher level control.
All oil-lubricated compressors produce condensate, which has to be treated prior to disposal. BOGE CC-2 oil-water separators operate with different filter stages, in which coated polypropylene fibres as well as charcoal are used. A residual oil content of < 10 ppm is therefore reliably achieved at the outlet, and this applies for all compressor oils – even for the fully synthetic oils that are standard nowadays.
BOGE CC-2 oil-water separator
- DIBT approval for usage worldwide
- Residual oil content of < 10 ppm
- Simplified maintenance
- Suitable for all types of oil
- With an optional electronic alarm contact
BOGE Max. Pressure Effective Delivery Volume
W × D × H
Weight Type psig m3/min cfm inch lbs CC 70-2 0 2.000 70.0 10 x 9.1 x 9.5 7 CC 130-2 0 4.000 130.0 15.4 x 8.3 x 14.5 18 CC 175-2 0 5.000 175.0 22.8 x 7.5 x 24 22 CC 350-2 0 10.000 350.0 25.6 x 9.4 x 29.5 37 CC 750-2 0 20.000 750.0 30.7 x 12 x 35.4 66 CC 1250-2 0 30.000 1,250.0 38.2 x 15 x 35.4 95 CC 2500-2 0 60.000 2,500.0 45.7 x 18.9 x 40.9 163
BOGE CC-2PDF, 2 MB